Posts Tagged ‘catalyst’

LED индикация на модулях коммутаторов Cisco

Написал admin . Опубликовано в Cisco просмотров 3 273

Так себеПойдетХорошоПонравилосьОтличный пост (No Ratings Yet)
Загрузка...

Световая индикация модулей Cisco

 

LED

Color/State

Description
STATUS Green All diagnostics pass. The module is operational (normal initialization sequence).
Orange The module is booting or running diagnostics (normal initialization sequence).Make sure the module is fully seated in its slot and that the ejector levers are completely closed.

An overtemperature condition has occurred. (A minor temperature threshold has been exceeded during environmental monitoring.)
Red The diagnostic test failed. The module is not operational because a fault occurred during the initialization sequence.An overtemperature condition has occurred. (A major temperature threshold has been exceeded during environmental monitoring.)
LINK Green The port is operational.
Orange The link has been disabled by software.
Flashing orange The link is bad and has been disabled due to a hardware failure.
Off No signal is detected.

Continue Reading No Comments

Рейтинг статей

Топ просмотров